SYBASE 11.0.0 For SCO Unix 安装手册

(转载:学习)
作者:SYBASE 11.0.0 For SCO Unix 安装手册
SYBASE SYSTEM 11.0.0 for SCO UNIX 5.0.5
安 装 说 明
1.首先必须确定网卡已正确地配置在系统上。
2.以root登录,用scoadmin命令创建Sybase用户,组属为Sybase
确定上述二部骤无误之后,我们可以转入一阶段地安装工作。
3.login:root
# divvy
系统 子分区表(试举例)
NameTypeNew Fs#Fist BlockLast Block
bootEAFSno0019999
swapNON FSno120000109999
rootHTFSno211000709999
/uHTFSno37100001309999
raw1NON FSno4--
raw2NON FSno5--
recoverNON FSno621104542110463
hd0WHOLE DISKno702111471
raw1和raw2是Sybase的数据库设备实际存放的物理设备名称。raw1用来存放数据库,raw2用来存放事务日志。
在这里我们正确地分配raw1和raw2的大小:
假设我们定义raw1=600M, raw2=200m。
nName or renawe a divishon
cCredit a new file system on this divison
tSelect or change filesystem type on new filesystem
pPrevent a new file system from being crented on the division
sStart a division on a different block
eEnd a division on a different block
rRestore the original division table
Enter you choice or q to Quit_____ n ↙
Whick division (o through 7): 4 ↙
What do your want to call it?:raw1 ↙
定义起始块,按需要设定起始块:
Enter you choice or q Quit: S ↙
Whick division ? :4 ↙
Start number block:1310000 ↙
(建议:boot 的大小为20MB,u文件系统的大小为500MB)
同上,如此类推定义raw2后,屏幕应提示
NameTypeNew Fs#Fist BlockLast Block
bootEAFSno0019999
swapNON FSno120000109999
rootHTESno211000709999
/uEAFSno37100001309999
raw1NON FSno413100001910000
raw2NON FSno519100012110001
recoverNON FSno621104542110463
hd0aWHOLE DISKno702111471
Enter you choice or q to Quit q ↙
系统提示:
iInstall the division set_up shown
rRetarn to the previous menu
eexit without installing a division table
Enter your choice or q to Quit i ↙
然后,准备物理设备raw1, raw2,在root下将raw1, rraw1, raw2, rraw2的属性及组名更改为sybase,并且权限为666
# cd dev ↙
# chown sybase raw* rraw* ↙
# chgrp sybase raw* rraw* ↙
# chmod 666 raw* rraw* ↙
然后退出以Sybase用户登录系统
$ mkdir install ↙
$ cd install ↙
$ tar xv6 sco_kernel.scr ↙
把光盘插入CD_ROM将它安装进文件系统,以root登录。
# mount /dev/cd0 /mnt ↙
再次以Sybase用户登录:
$ cd /mnt
$ sybload -D ↙
current directory is "/mnt"设置安装的路径
Is this the correct directory for installation?
If so, Please enter 'y' or 'n' : n ↙
Please specify the correct installation directory here
A null entry will terminate this installation: /u/sybase ↙
Current directory is "/u/Sybase"
Is this the correct directory for installation?
If so, Please enter 'Y' or 'Y' : y
设置安装的方式:Is this a local or Remote in installation, as defined in your installation Guide?
Please enter L for Local or R for Remote.
> L ↙
Please enter the full name of the disk file of the global archive : > /mnt/sybimage ↙
Yor specified /mnt/sybimage for the media device, Is this correct? Please enter 'y' or 'Y' to continue: y
紧跟随着系统将会提示你输入Sybase产品的序列号(CAS):
CAS:DVBYBY SOKOBY BYBYBD BYBKBK BZTWLO BJVL ↙
正确输入序列号后,会提供一串可供安装的菜单项
选择1:Sybase 11.0之后回车
可把光盘上的Sybase安装至/u/Sybase之下。
至此,Sybase已安装至硬盘上面,我们可以进行设置方面地工作。
$ pwd ↙ $/mnt
$ cd.. ↙ 退出mnt目录。
首先, 要把在/mnt下的sybase拆卸掉,我们以root登录,执行# umount /dev/cd0 ↙ 即可
然后# cd /u/sybase/install ↙ “设置环境变量”
# SYBASE = /u/sybase; export SYBASE ↙
增大SHMMAX的大小
# 重新链接内核 sh ./sco_kernel.scr sybase ↙
# cd /etc/conf/cf.d ↙
# vi stune
删掉MAXPMEM 0该行后,存盘退出
# vi mtune
修改NAIOHBUF该行,将50修改成500后,存盘退出
# cd /etc/conf/pack.d /itimer ↙
# cp space.c.presyb space.c ↙
# vi space.c
修改该行int alarm_accuracy设为等于-1;
# cd /usr/lib
# cp aiomemlock. presyb aiomemlock ↙
# vi aiomemlock (在该文件末增加一行sybase 28000000)
# cd /etc/conf/sdevice.d
# vi aio
将该文件重覆的两行删掉一行后,存盘退出
# vi suds
将suds该行的N,改为Y后存盘退出
# cd /etc/rc2.d
# vi S99*
在#字符下一行的行首加入一句: /etc/suds_ctrl -a 100
该100为Sybase的组号,做完此步之后
链接内核重新启动后,重新进入Sybase用户
$ cd install
$ sybinit
此时,请参考附页1,将参数设置正确,提示安装成功即可。






附页1

注:在下文中每屏信息由横线隔开,在中在值为输入值,MASTER设备为raw1.
Sybase的主目录为/u/sybase


SYBINIT

1. Release directory: /u/sybase

2. Edit / View Interfaces File

3. Configure a Server product
4. Configure an Open Client/Server product
5. Configure a Front End product


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:  
----------------------------------------------------------------------------

CONFIGURE SERVER PRODUCTS

Product Date Installed Date Configured
1. SQL Server Jun 09 96 14:35 Jun 13 96 17:30
2. Backup Server Jun 09 96 14:35 Jun 13 96 17:32


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:  
----------------------------------------------------------------------------

NEW OR EXISTING SQL SERVER

1. Configure a new SQL Server
2. Configure an existing SQL Server


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:  
----------------------------------------------------------------------------

ADD NEW SQL SERVER

1. SQL Server name:SYBASE


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the name of the new SQL Server (default is 'SYBASE'):  
----------------------------------------------------------------------------


ADD NEW SQL SERVER

1. SQL Server name:SYBASE


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
----------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Incomplete

2. MASTER DEVICE CONFIGURATION Incomplete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Incomplete
4. SET ERRORLOG LOCATION Incomplete
5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete
7. CONFIGURE CHARACTER SETS Incomplete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
----------------------------------------------------------------------------

SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYBASE

1. Retry Count: 0
2. Retry Delay: 0

3. Add a new listener service


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Enter the retry count (default is '0'):  
----------------------------------------------------------------------------


SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYBASE

1. Retry Count: 3
2. Retry Delay: 0

3. Add a new listener service


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Enter the delay interval between retries (default is '0'):  
----------------------------------------------------------------------------


SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYBASE

1. Retry Count: 3
2. Retry Delay: 3

3. Add a new listener service


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
----------------------------------------------------------------------------

EDIT TCP SERVICE

1. Hostname/Address: credit.credit.COM
2. Port:
3. Name Alias:

4. Delete this service from the interfaces entry



Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Enter the port number to use for this entry (default is ''):
----------------------------------------------------------------------------
EDIT TCP SERVICE

1. Hostname/Address: credit.credit.COM
2. Port: 7371
3. Name Alias:

4. Delete this service from the interfaces entry



Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Is this information is correct?  
----------------------------------------------------------------------------


SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYBASE

1. Retry Count: 3
2. Retry Delay: 3

3. Add a new listener service

Modify or delete a service

Listener services available:

Protocol Address Port Name Alias
4. tcp credit.credit.COM 7371



Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Write the changes to the interfaces file now?
----------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Incomplete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Incomplete
4. SET ERRORLOG LOCATION Incomplete
5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete
7. CONFIGURE CHARACTER SETS Incomplete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
----------------------------------------------------------------------------

MASTER DEVICE CONFIGURATION

1. Master Device:  

2. Size (Meg): 29.299805
(建议:Master Device最好放在裸设备/dev/rraw1下)

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
----------------------------------------------------------------------------

MASTER DEVICE CONFIGURATION

1. Master Device:  
2. Size (Meg): 29.299805



Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Enter the size of the SQL sever's master device in megabutes:40
----------------------------------------------------------------------------------

MASTER DEVICE CONFIGURATION

1. Master Device:  
2. Size (Meg): 40


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
----------------------------------------------------------------------------------
SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Incomplete
4. SET ERRORLOG LOCATION Incomplete
5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete
7. CONFIGURE CHARACTER SETS Incomplete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
---------------------------------------------------------------------------

SYBSYSTEMPROCS DATABASE CONFIGURATION

1. sybsystemprocs database size (Meg): 16

2. sybsystemprocs logical device name: sysprocsdev

3. create new device for the sybsystemprocs database: yes

4. physical name of new device:

5. size of the new device (Meg): 16



Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Enter the physical device name for the sybsystemprocs database:  
(建议:sybsystemprocs database放在裸设备/dev/rraw2下)
---------------------------------------------------------------------------

SYBSYSTEMPROCS DATABASE CONFIGURATION

1. sybsystemprocs database size (Meg): 16

2. sybsystemprocs logical device name: sysprocsdev

3. create new device for the sybsystemprocs database: yes

4. physical name of new device: /u/sybase/data/sysprocs.dat

5. size of the new device (Meg): 16


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
----------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Incomplete
5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete
7. CONFIGURE CHARACTER SETS Incomplete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
---------------------------------------------------------------------------

SET ERRORLOG LOCATION

1. SQL Server errlrlog: /u/sybase/install/errorlog



Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
---------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Complete
5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete
7. CONFIGURE CHARACTER SETS Incomplete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
---------------------------------------------------------------------------

SET THE SQL SERVER'S BACKUP SERVER

1. SQL Server Backuup Server name: SYB_BACKUP


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
----------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Complete
5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Incomplete
7. CONFIGURE CHARACTER SETS Incomplete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
---------------------------------------------------------------------------

CONFIGURE LANGUAGES

Current default language: us_english
Current default character set: ISO 8859-1 (Latin-1) - Westen European
8-bitcharacter set.
Current sort order: Binary ordering, for the ISO 8859/1 or Latin-1
character set (iso_1).

Select the language you want to install, remove, or designate as the default
language.

Language Installed? Remove Install Make default
1. us_english yes no no yes



Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Complete
5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Complete
7. CONFIGURE CHARACTER SETS Incomplete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
---------------------------------------------------------------------------

CONFIGURE CHARACTER SETS

Current default language: us_english
Current default character set: ISO 8859-1 (Latin-1) - Westen European
8-bitcharacter set.
Current sort order: Binary ordering, for the ISO 8859/1 or Latin-1
character set (iso_1).

Select the character set you want to install, remove, or designate as the
default character set.

Character set Installed? Remove Install Make default
1. ASCII, for use with unsp yesno no no
2. Code Page 437, (United S nono no no
3. Code Page 850 (Multiling nono no no
4. ISO 8859-1 (Latin-1) - W yesno no yes
5. Macintosh default charac nono no no
6. Hewlett-Packard propriet nono no no


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
----------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Complete
5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Complete
7. CONFIGURE CHARACTER SETS Complete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
---------------------------------------------------------------------------

CONFIGURE SORT ORDER
Current default language: us_english
Current default character set: ISO 8859-1 (Latin-1) - Westen European
8-bitcharacter set.
Current sort order: Binary ordering, for the ISO 8859/1 or Latin-1
character set (iso_1).

Select a sort order.

SortOrder Chosen
1. Binary ordering, for the ISO 8859/1 or Latin-1 characterset set (is yes
2. General purpose dictionary ordering. no
3. Dictionary order, case insensitive, accent insensitive. no
4. Dictionary order, case insensitive. no
5. Dictionary order, case insensitive with preference. no


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
------------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Complete
5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Complete
7. CONFIGURE CHARACTER SETS Complete
8. CONFIGURE SORT ORDER Complete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
---------------------------------------------------------------------------

ACTIVATE AUDITING

1. Install auditing: no

2. sybsecurity database size (Meg): 5

3. sybsecurity logical device name: sybsecurity

4. creat new device for the sybsecurity database: no




Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

------------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Complete
5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Complete
7. CONFIGURE CHARACTER SETS Complete
8. CONFIGURE SORT ORDER Complete

9. ACTIVATE AUDITING Complete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Execute the SQL Server Configuration now?
---------------------------------------------------------------------------




Running task to create the master device.
Building the master device
...................................Done
Task to create the msster device succeeded.
Running task jto boot the SQL Server.
Task to boot the SQL Server succeeded.
Running task to create the sybsystemprocs database.
sybsystemprocs database created.
Task to created the sybsystemprocs database succeeded.
Running task to install system stored procedures.
............................................................................
.....................................................
Task to install system stored procedures succeeded.
Running task to set permissions for the 'model' database.
.Done
Task to set permissions for the 'model' database succeeded.
Running task to set the default character set and/or default sort order for the
SQL Server.
Setting the default character set to iso_1
Sort order 'binary' has already been installed.
Character set 'iso_1' is already is default.
Sort order 'binary' is already the default.
Task to set the default character set and/or default sort order for the SQL
Server succeeded.
Running task to set the default language.
Setting the default language to us_english.
Language 'us_english' is already the default.
Task to set the default language succeeded.

Configuration completed successfully.
Press  to continue.


-----------------------------------------------------------------------------

NEW OR EXISTING SQL SERVER

1. Configure a new SQL Server
2. Configure an existing SQL Server



Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
-----------------------------------------------------------------------------

CONFIGURE SERVER PRODUCTS

Product Date Installed Date Configured
1. SQL Server Jun 09 96 14:35 Jun 13 96 17:30
2. Backup Server Jun 09 96 14:35 Jun 13 96 17:32


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:  
----------------------------------------------------------------------------

NEW OR EXISTING BACKUP SERVER

1. Configure a new Backup Server
2. Configure an existing Backup Server


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:  
----------------------------------------------------------------------------

ADD NEW BACKUP SERVER

1. Backup Server name:SYB_BACKUP


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:  
----------------------------------------------------------------------------

BACKUP SERVER CONFIGURATION

1. Backup Server errorlog: /u/sybase/install/backup.log
2. Enter / Modify Backup Server interfaces file information




Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:  
----------------------------------------------------------------------------

SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYB_BACKUP

1. Retry Count: 0
2. Retry Delay: 0

3. Add a new listener service


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Enter the retry count (default is '0'):  
----------------------------------------------------------------------------


SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYB_BACKUP

1. Retry Count: 3
2. Retry Delay: 0

3. Add a new listener service


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Enter the delay interval between retries (default is '0'):  
----------------------------------------------------------------------------

SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYB_BACKUP


1. Retry Count: 3
2. Retry Delay: 3

3. Add a new listener service


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
----------------------------------------------------------------------------

EDIT TCP SERVICE

1. Hostname/Address: credit.credit.COM
2. Port:
3. Name Alias:

4. Delete this service from the interfaces entry



Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Enter the port number to use for this entry (default is ''):
----------------------------------------------------------------------------

EDIT TCP SERVICE

1. Hostname/Address: credit.credit.COM
2. Port: 7372
3. Name Alias:

4. Delete this service from the interfaces entry

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Is this information is correct?  
----------------------------------------------------------------------------

SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYB_BACKUP

1. Retry Count: 3
2. Retry Delay: 3

3. Add a new listener service

Modify or delete a service

Listener services available:

Protocol Address Port Name Alias
4. tcp credit.credit.C 7372


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Write the changes to the interfaces file now?
----------------------------------------------------------------------------

BACKUP SERVER CONFIGURATION

1. Backup Server errorlog: /u/sybase/install/backup.log
2. Enter / Modify Backup Server interfaces file information


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:
Execute the Backup Server configuration now?
----------------------------------------------------------------------------

Running task to update the Backup Server runserver file.
Task jto update the Backup Server runserver file succeeded.
Running task to boot the Backup Serve.
waiting for server 'SYB_BACKUP' to boot...
Task to boot the Backup Server succeeded.

Configuration completed successfully.

Press  to continue.

-------------------------------------------------------------------------

NEW OR EXISTING BACKUP SERVER

1. Configure a new Backup Server
2. Configure an existing Backup Server


Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ?Help

Enter the number of your choice and press return:
-----------------------------------------------------------------------------

CONFIGURE SERVER PRODUCTS

Product Date Installed Date Configured
1. SQL Server Jun 09 96 14:35 Jun 13 96 17:30
2. Backup Server Jun 09 96 14:35 Jun 13 96 17:32

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:  
---------------------------------------------------------------------------

SYBINIT

1. Release directory: /u/sybase

2. Edit / View Interfaces File

3. Configure a Server product
4. Configure an Open Client/Server product
5. Configure a Front End product

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:  
----------------------------------------------------------------------------

Exiting.
The log file for this session is '/u/sybase/init/logs/log0613.024'.

posted on 2006-04-03 12:56 prince 阅读(234) 评论(0)  编辑  收藏 所属分类: 硬件网络


只有注册用户登录后才能发表评论。


网站导航:
 
<2006年4月>
2627282930311
2345678
9101112131415
16171819202122
23242526272829
30123456

导航

统计

常用链接

留言簿(4)

随笔分类(72)

相册

blog友人

搜索

最新评论

阅读排行榜