海鸥航际

JAVA站
posts - 11, comments - 53, trackbacks - 1, articles - 102
J2EE是个开放的世界,因此各个应用服务器有自己的配置文件格式。下面摘录了Liferay Portal Enterprise 的连接字符串的说明文档。

基本上针对各种数据库有个完备的说明了,以后查阅不用到处去找了。

Databases

Liferay Portal Enterprise was designed to be database agnostic. To make this possible, all business logic had to be concentrated in the middle tier with the database being as dumb as possible. This means the portal does not rely on any database specific stored procedures or on the database to generate unique keys.

To generate scripts that create and populate the database, go to /portal-ejb and run the ant command: ant build-db. This command will generate the scripts for DB2, Firebird, Hypersonic, Interbase, MySQL, Oracle, PostgreSQL, and SQL Server.

The generated scripts reside in /sql/portal and are named: portal-db2.sql, portal-firebird.sql, portal-hypersonic.sql, portal-interbase.sql, portal-mysql.sql, portal-oracle.sql, portal-postgresql.sql, and portal-sql-server.sql.

I.   DB2
II.   Firebird
III.   Hypersonic
IV.   InterBase
V.   MySQL
VI.   Oracle
VII.   PostgreSQL
VIII.   SAP
IX.   SQL Server

I.   DB2

 
a.   Create a database in DB2 called lportal. Use Command Center to load the script named portal-db2.sql.

b.   JBoss with DB2

Create a data source bound to jdbc/LiferayPool by editing liferay-ds.xml.

<datasources>
   <local-tx-datasource>
     <jndi-name>jdbc/LiferayPool</jndi-name>
     <connection-url>
         jdbc:db2://localhost/lportal
     </connection-url>
     <driver-class>com.liferay.jdbc.LiferayDriver</driver-class>
     <user-name>test</user-name>
     <password>test</password>
     <min-pool-size>0</min-pool-size>
   </local-tx-datasource>
</datasources>

Copy the JDBC driver for DB2 to /server/default/lib. JDBC Drivers can be found from the database vendor's web site.

Note: On startup, JBoss will throw a org.jboss.util.NestedSQLException with the message "Apparently wrong driver class specified for URL." That message comes up because we are using a wrapper for the DB2 driver. The Liferay driver will continue to work and the message can be ignored.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

c.   Jetty with DB2

Create a data source bound to jdbc/LiferayPool by editing /etc/jetty.xml.

<Call name="addService">
    <Arg>
        <New class="org.mortbay.jetty.plus.JotmService">
            <Set name="Name">TransactionMgr</Set>
            <Call name="addDataSource">
                <Arg>jdbc/LiferayPool</Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.standard.StandardXADataSource">
                        <Set name="DriverName">com.liferay.jdbc.LiferayDriver</Set>
                        <Set name="Url">jdbc:db2://localhost/lportal</Set>
                        <Set name="User">test</Set>
                        <Set name="Password">test</Set>
                    </New>
                </Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.pool.StandardXAPoolDataSource">
                        <Arg type="Integer">4</Arg>
                        <Set name="MinSize">4</Set>
                        <Set name="MaxSize">15</Set>
                    </New>
                </Arg>
            </Call>
        </New>
    </Arg>
</Call>

Copy the JDBC driver for DB2 to /lib. JDBC Drivers can be found from the database vendor's web site.

d.   JOnAS with DB2

Create a data source bound to jdbc/LiferayPool by editing /conf/jonas/liferay-ds.properties.

datasource.name=jdbc/LiferayPool
datasource.url=jdbc:db2://localhost/lportal
datasource.classname=com.liferay.jdbc.LiferayDriver
datasource.username=test
datasource.password=test
datasource.mapper=rdb.db2

Copy the JDBC driver for DB2 to /lib/ext. JDBC Drivers can be found from the database vendor's web site.

e.   JRun with DB2

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:db2://localhost/lportal as the URL, com.liferay.jdbc.LiferayDriver as the driver, "test" as the user name, and "test" as the password.

f.   Oracle9iAS with DB2

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="com.liferay.jdbc.LiferayDriver"
    url="jdbc:db2://localhost/lportal"
    username="test"
    password="test"
    inactivity-timeout="30"
    schema="database-schemas/db2.xml"
/>

Copy the JDBC driver for DB2 to /j2ee/home/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

g.   Orion with DB2

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="com.liferay.jdbc.LiferayDriver"
    url="jdbc:db2://localhost/lportal"
    username="test"
    password="test"
    inactivity-timeout="30"
    schema="database-schemas/db2.xml"
/>

Copy the JDBC driver for DB2 to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

h.   Pramati with DB2

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:db2://localhost/lportal as the URL, com.liferay.jdbc.LiferayDriver as the driver, "test" as the user name, and "test" as the password.

i.   RexIP with DB2

Create a data source bound to jdbc/LiferayPool and set the proper JDBC properties by editing /server.xml.

<datasource
    name="LiferayPool"
    jndi-name="jdbc/LiferayPool"
    driver="com.liferay.jdbc.LiferayDriver"
    url="jdbc:db2://localhost/lportal"
    username="test"
    password="test"
    max-pool="100"
    transactional="false"
/>

Copy the JDBC driver for DB2 to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

j.   Sun JSAS with DB2

Use the Administration Console to do the following:

Create a connection pool org.apache.commons.dbcp.BasicDataSource as the data source class. The pool properties are driverClassName=com.liferay.jdbc.LiferayDriver, url=jdbc:db2://localhost/lportal, username=test, and password=test.

Create a data source bound to jdbc/LiferayPool.

k.   Tomcat with DB2

Create a data source bound to jdbc/LiferayPool by editing /conf/Catalina/localhost/liferay.xml.

<Context...>
    ...
    <Resource
        name="jdbc/LiferayPool"
        auth="Container"
        type="javax.sql.DataSource"
    />
    <ResourceParams name="jdbc/LiferayPool">
        <parameter>
            <name>driverClassName</name>
            <value>com.liferay.jdbc.LiferayDriver</value>
        </parameter>
        <parameter>
            <name>url</name>
            <value>jdbc:db2://localhost/lportal</value>
        </parameter>
        <parameter>
            <name>username</name>
            <value>test</value>
        </parameter>
        <parameter>
            <name>password</name>
            <value>test</value>
        </parameter>
    </ResourceParams>
</Context>

Copy the JDBC driver for DB2 to /common/lib. JDBC Drivers can be found from the database vendor's web site.

l.   WebLogic with DB2

Use the Administration Console to do the following:

Create a connection pool using jdbc:db2://localhost/lportal as the URL, com.liferay.jdbc.LiferayDriver as the driver, "test" as the user name, and "test" as the password.

Create a data source bound to jdbc/LiferayPool.

Create a Tx data source bound to jdbc/LiferayEJB.

m.   WebSphere with DB2

Use the Administrative Console: Resources -> JDBC Providers.

Create a new user-defined JDBC provider. Remove any references in the class path. Set org.apache.commons.dbcp.cpdsadapter.DriverAdapterCPDS as the implementation class name.

Copy commons-dbcp.jar, commons-pool.jar, and your JDBC driver to /AppServer/lib/ext.

Create a data source bound to jdbc/LiferayPool. The custom properties are driver=com.liferay.jdbc.LiferayDriver, url=jdbc:db2://localhost/lportal, username=test, and password=test.

II.   Firebird

 
a.   Create a database in InterBase located at /opt/data/lportal.gdb. At your UNIX shell or DOS prompt, type isql -U sysdba -P masterkey -d /opt/data/lportal.gdb -i portal-interbase.sql.

b.   JBoss with Firebird

Create a data source bound to jdbc/LiferayPool by editing liferay-ds.xml.

<datasources>
   <local-tx-datasource>
     <jndi-name>jdbc/LiferayPool</jndi-name>
     <connection-url>
         jdbc:firebirdsql://localhost/opt/data/lportal.gdb
     </connection-url>
     <driver-class>org.firebirdsql.jdbc.FBDriver</driver-class>
     <user-name>sysdba</user-name>
     <password>masterkey</password>
     <min-pool-size>0</min-pool-size>
   </local-tx-datasource>
</datasources>

Copy the JDBC driver for Firebird to /server/default/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

c.   Jetty with Firebird

Create a data source bound to jdbc/LiferayPool by editing /etc/jetty.xml.

<Call name="addService">
    <Arg>
        <New class="org.mortbay.jetty.plus.JotmService">
            <Set name="Name">TransactionMgr</Set>
            <Call name="addDataSource">
                <Arg>jdbc/LiferayPool</Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.standard.StandardXADataSource">
                        <Set name="DriverName">org.firebirdsql.jdbc.FBDriver</Set>
                        <Set name="Url">jdbc:firebirdsql://localhost/opt/data/lportal.gdb</Set>
                        <Set name="User">sysdba</Set>
                        <Set name="Password">masterkey</Set>
                    </New>
                </Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.pool.StandardXAPoolDataSource">
                        <Arg type="Integer">4</Arg>
                        <Set name="MinSize">4</Set>
                        <Set name="MaxSize">15</Set>
                    </New>
                </Arg>
            </Call>
        </New>
    </Arg>
</Call>

Copy the JDBC driver for Firebird to /lib. JDBC Drivers can be found from the database vendor's web site.

d.   JOnAS with Firebird

Create a data source bound to jdbc/LiferayPool by editing /conf/jonas/liferay-ds.properties.

datasource.name=jdbc/LiferayPool
datasource.url=jdbc:firebirdsql://localhost/opt/data/lportal.gdb
datasource.classname=org.firebirdsql.jdbc.FBDriver
datasource.username=sysdba
datasource.password=masterkey
datasource.mapper=rdb.firebird

Copy the JDBC driver for Firebird to /lib/ext. JDBC Drivers can be found from the database vendor's web site.

e.   JRun with Firebird

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:firebirdsql://localhost/opt/data/lportal.gdb as the URL, org.firebirdsql.jdbc.FBDriver as the driver, "sysdba" as the user name, and "masterkey" as the password.

f.   Oracle9iAS with Firebird

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="org.firebirdsql.jdbc.FBDriver"
    url="jdbc:firebirdsql://localhost/opt/data/lportal.gdb"
    username="sysdba"
    password="masterkey"
    inactivity-timeout="30"
/>

Copy the JDBC driver for Firebird to /j2ee/home/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

g.   Orion with Firebird

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="org.firebirdsql.jdbc.FBDriver"
    url="jdbc:firebirdsql://localhost/opt/data/lportal.gdb"
    username="sysdba"
    password="masterkey"
    inactivity-timeout="30"
/>

Copy the JDBC driver for Firebird to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

h.   Pramati with Firebird

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:firebirdsql://localhost/opt/data/lportal.gdb as the URL, org.firebirdsql.jdbc.FBDriver as the driver, "sysdba" as the user name, and "masterkey" as the password.

i.   RexIP with Firebird

Create a data source bound to jdbc/LiferayPool and set the proper JDBC properties by editing /server.xml.

<datasource
    name="LiferayPool"
    jndi-name="jdbc/LiferayPool"
    driver="org.firebirdsql.jdbc.FBDriver"
    url="jdbc:firebirdsql://localhost/opt/data/lportal.gdb"
    username="sysdba"
    password="masterkey"
    max-pool="100"
    transactional="false"
/>

Copy the JDBC driver for Firebird to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

j.   Sun JSAS with Firebird

Use the Administration Console to do the following:

Create a connection pool org.apache.commons.dbcp.BasicDataSource as the data source class. The pool properties are driverClassName=org.firebirdsql.jdbc.FBDriver, url=jdbc:firebirdsql://localhost/opt/data/lportal.gdb, username=sysdba, and password=masterkey.

Create a data source bound to jdbc/LiferayPool.

k.   Tomcat with Firebird

Create a data source bound to jdbc/LiferayPool by editing /conf/Catalina/localhost/liferay.xml.

<Context...>
    ...
    <Resource
        name="jdbc/LiferayPool"
        auth="Container"
        type="javax.sql.DataSource"
    />
    <ResourceParams name="jdbc/LiferayPool">
        <parameter>
            <name>driverClassName</name>
            <value>org.firebirdsql.jdbc.FBDriver</value>
        </parameter>
        <parameter>
            <name>url</name>
            <value>jdbc:firebirdsql://localhost/opt/data/lportal.gdb</value>
        </parameter>
        <parameter>
            <name>username</name>
            <value>sysdba</value>
        </parameter>
        <parameter>
            <name>password</name>
            <value>masterkey</value>
        </parameter>
    </ResourceParams>
</Context>

Copy the JDBC driver for Firebird to /common/lib. JDBC Drivers can be found from the database vendor's web site.

l.   WebLogic with Firebird

Use the Administration Console to do the following:

Create a connection pool using jdbc:firebirdsql://localhost/opt/data/lportal.gdb as the URL, org.firebirdsql.jdbc.FBDriver as the driver, "sysdba" as the user name, and "masterkey" as the password.

Create a data source bound to jdbc/LiferayPool.

Create a Tx data source bound to jdbc/LiferayEJB.

m.   WebSphere with Firebird

Use the Administrative Console: Resources -> JDBC Providers.

Create a new user-defined JDBC provider. Remove any references in the class path. Set org.apache.commons.dbcp.cpdsadapter.DriverAdapterCPDS as the implementation class name.

Copy commons-dbcp.jar, commons-pool.jar, and your JDBC driver to /AppServer/lib/ext.

Create a data source bound to jdbc/LiferayPool. The custom properties are driver=org.firebirdsql.jdbc.FBDriver, url=jdbc:firebirdsql://localhost/opt/data/lportal.gdb, username=sysdba, and password=masterkey.

III.   Hypersonic

 
a.   Run the Hypersonic Database Manager and log into the database instance. Cut and paste the contents of portal-hypersonic.sql into the manager and excecute the SQL statements.

b.   JBoss with Hypersonic

Create a data source bound to jdbc/LiferayPool by editing liferay-ds.xml.

<datasources>
   <local-tx-datasource>
     <jndi-name>jdbc/LiferayPool</jndi-name>
     <connection-url>
         jdbc:hsqldb:hsql://localhost
     </connection-url>
     <driver-class>org.hsqldb.jdbcDriver</driver-class>
     <user-name></user-name>
     <password></password>
     <min-pool-size>0</min-pool-size>
   </local-tx-datasource>
</datasources>

Copy the JDBC driver for Hypersonic to /server/default/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

c.   Jetty with Hypersonic

Create a data source bound to jdbc/LiferayPool by editing /etc/jetty.xml.

<Call name="addService">
    <Arg>
        <New class="org.mortbay.jetty.plus.JotmService">
            <Set name="Name">TransactionMgr</Set>
            <Call name="addDataSource">
                <Arg>jdbc/LiferayPool</Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.standard.StandardXADataSource">
                        <Set name="DriverName">org.hsqldb.jdbcDriver</Set>
                        <Set name="Url">jdbc:hsqldb:hsql://localhost</Set>
                        <Set name="User"></Set>
                        <Set name="Password"></Set>
                    </New>
                </Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.pool.StandardXAPoolDataSource">
                        <Arg type="Integer">4</Arg>
                        <Set name="MinSize">4</Set>
                        <Set name="MaxSize">15</Set>
                    </New>
                </Arg>
            </Call>
        </New>
    </Arg>
</Call>

Copy the JDBC driver for Hypersonic to /lib. JDBC Drivers can be found from the database vendor's web site.

d.   JOnAS with Hypersonic

Create a data source bound to jdbc/LiferayPool by editing /conf/jonas/liferay-ds.properties.

datasource.name=jdbc/LiferayPool
datasource.url=jdbc:hsqldb:hsql://localhost
datasource.classname=org.hsqldb.jdbcDriver
datasource.username=
datasource.password=
datasource.mapper=rdb.hsql

Copy the JDBC driver for Hypersonic to /lib/ext. JDBC Drivers can be found from the database vendor's web site.

e.   JRun with Hypersonic

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:hsqldb:hsql://localhost as the URL, org.hsqldb.jdbcDriver as the driver, "" as the user name, and "" as the password.

f.   Oracle9iAS with Hypersonic

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="org.hsqldb.jdbcDriver"
    url="jdbc:hsqldb:hsql://localhost"
    username=""
    password=""
    inactivity-timeout="30"
    schema="database-schemas/hypersonic.xml"
/>

Copy the JDBC driver for Hypersonic to /j2ee/home/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

g.   Orion with Hypersonic

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="org.hsqldb.jdbcDriver"
    url="jdbc:hsqldb:hsql://localhost"
    username=""
    password=""
    inactivity-timeout="30"
    schema="database-schemas/hypersonic.xml"
/>

Copy the JDBC driver for Hypersonic to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

h.   Pramati with Hypersonic

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:hsqldb:hsql://localhost as the URL, org.hsqldb.jdbcDriver as the driver, "" as the user name, and "" as the password.

i.   RexIP with Hypersonic

Create a data source bound to jdbc/LiferayPool and set the proper JDBC properties by editing /server.xml.

<datasource
    name="LiferayPool"
    jndi-name="jdbc/LiferayPool"
    driver="org.hsqldb.jdbcDriver"
    url="jdbc:hsqldb:hsql://localhost"
    username=""
    password=""
    max-pool="100"
    transactional="false"
/>

Copy the JDBC driver for Hypersonic to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

j.   Sun JSAS with Hypersonic

Use the Administration Console to do the following:

Create a connection pool org.apache.commons.dbcp.BasicDataSource as the data source class. The pool properties are driverClassName=org.hsqldb.jdbcDriver, url=jdbc:hsqldb:hsql://localhost, username=, and password=.

Create a data source bound to jdbc/LiferayPool.

k.   Tomcat with Hypersonic

Create a data source bound to jdbc/LiferayPool by editing /conf/Catalina/localhost/liferay.xml.

<Context...>
    ...
    <Resource
        name="jdbc/LiferayPool"
        auth="Container"
        type="javax.sql.DataSource"
    />
    <ResourceParams name="jdbc/LiferayPool">
        <parameter>
            <name>driverClassName</name>
            <value>org.hsqldb.jdbcDriver</value>
        </parameter>
        <parameter>
            <name>url</name>
            <value>jdbc:hsqldb:hsql://localhost</value>
        </parameter>
        <parameter>
            <name>username</name>
            <value></value>
        </parameter>
        <parameter>
            <name>password</name>
            <value></value>
        </parameter>
    </ResourceParams>
</Context>

Copy the JDBC driver for Hypersonic to /common/lib. JDBC Drivers can be found from the database vendor's web site.

l.   WebLogic with Hypersonic

Use the Administration Console to do the following:

Create a connection pool using jdbc:hsqldb:hsql://localhost as the URL, org.hsqldb.jdbcDriver as the driver, "" as the user name, and "" as the password.

Create a data source bound to jdbc/LiferayPool.

Create a Tx data source bound to jdbc/LiferayEJB.

m.   WebSphere with Hypersonic

Use the Administrative Console: Resources -> JDBC Providers.

Create a new user-defined JDBC provider. Remove any references in the class path. Set org.apache.commons.dbcp.cpdsadapter.DriverAdapterCPDS as the implementation class name.

Copy commons-dbcp.jar, commons-pool.jar, and your JDBC driver to /AppServer/lib/ext.

Create a data source bound to jdbc/LiferayPool. The custom properties are driver=org.hsqldb.jdbcDriver, url=jdbc:hsqldb:hsql://localhost, username=, and password=.

IV.   InterBase

 
a.   Create a database in InterBase located at /opt/data/lportal.gdb. At your UNIX shell or DOS prompt, type isql -U sysdba -P masterkey -d /opt/data/lportal.gdb -i portal-firebird.sql.

b.   JBoss with InterBase

Create a data source bound to jdbc/LiferayPool by editing liferay-ds.xml.

<datasources>
   <local-tx-datasource>
     <jndi-name>jdbc/LiferayPool</jndi-name>
     <connection-url>
         jdbc:interbase://localhost/opt/data/lportal.gdb
     </connection-url>
     <driver-class>interbase.interclient.Driver</driver-class>
     <user-name>sysdba</user-name>
     <password>masterkey</password>
     <min-pool-size>0</min-pool-size>
   </local-tx-datasource>
</datasources>

Copy the JDBC driver for InterBase to /server/default/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

c.   Jetty with InterBase

Create a data source bound to jdbc/LiferayPool by editing /etc/jetty.xml.

<Call name="addService">
    <Arg>
        <New class="org.mortbay.jetty.plus.JotmService">
            <Set name="Name">TransactionMgr</Set>
            <Call name="addDataSource">
                <Arg>jdbc/LiferayPool</Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.standard.StandardXADataSource">
                        <Set name="DriverName">interbase.interclient.Driver</Set>
                        <Set name="Url">jdbc:interbase://localhost/opt/data/lportal.gdb</Set>
                        <Set name="User">sysdba</Set>
                        <Set name="Password">masterkey</Set>
                    </New>
                </Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.pool.StandardXAPoolDataSource">
                        <Arg type="Integer">4</Arg>
                        <Set name="MinSize">4</Set>
                        <Set name="MaxSize">15</Set>
                    </New>
                </Arg>
            </Call>
        </New>
    </Arg>
</Call>

Copy the JDBC driver for InterBase to /lib. JDBC Drivers can be found from the database vendor's web site.

d.   JOnAS with InterBase

Create a data source bound to jdbc/LiferayPool by editing /conf/jonas/liferay-ds.properties.

datasource.name=jdbc/LiferayPool
datasource.url=jdbc:interbase://localhost/opt/data/lportal.gdb
datasource.classname=interbase.interclient.Driver
datasource.username=sysdba
datasource.password=masterkey
datasource.mapper=rdb.firebird

Copy the JDBC driver for InterBase to /lib/ext. JDBC Drivers can be found from the database vendor's web site.

e.   JRun with InterBase

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:interbase://localhost/opt/data/lportal.gdb as the URL, interbase.interclient.Driver as the driver, "sysdba" as the user name, and "masterkey" as the password.

f.   Oracle9iAS with InterBase

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="interbase.interclient.Driver"
    url="jdbc:interbase://localhost/opt/data/lportal.gdb"
    username="sysdba"
    password="masterkey"
    inactivity-timeout="30"
/>

Copy the JDBC driver for InterBase to /j2ee/home/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

g.   Orion with InterBase

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="interbase.interclient.Driver"
    url="jdbc:interbase://localhost/opt/data/lportal.gdb"
    username="sysdba"
    password="masterkey"
    inactivity-timeout="30"
/>

Copy the JDBC driver for InterBase to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

h.   Pramati with InterBase

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:interbase://localhost/opt/data/lportal.gdb as the URL, interbase.interclient.Driver as the driver, "sysdba" as the user name, and "masterkey" as the password.

i.   RexIP with InterBase

Create a data source bound to jdbc/LiferayPool and set the proper JDBC properties by editing /server.xml.

<datasource
    name="LiferayPool"
    jndi-name="jdbc/LiferayPool"
    driver="interbase.interclient.Driver"
    url="jdbc:interbase://localhost/opt/data/lportal.gdb"
    username="sysdba"
    password="masterkey"
    max-pool="100"
    transactional="false"
/>

Copy the JDBC driver for InterBase to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

j.   Sun JSAS with InterBase

Use the Administration Console to do the following:

Create a connection pool org.apache.commons.dbcp.BasicDataSource as the data source class. The pool properties are driverClassName=interbase.interclient.Driver, url=jdbc:interbase://localhost/opt/data/lportal.gdb, username=sysdba, and password=masterkey.

Create a data source bound to jdbc/LiferayPool.

k.   Tomcat with InterBase

Create a data source bound to jdbc/LiferayPool by editing /conf/Catalina/localhost/liferay.xml.

<Context...>
    ...
    <Resource
        name="jdbc/LiferayPool"
        auth="Container"
        type="javax.sql.DataSource"
    />
    <ResourceParams name="jdbc/LiferayPool">
        <parameter>
            <name>driverClassName</name>
            <value>interbase.interclient.Driver</value>
        </parameter>
        <parameter>
            <name>url</name>
            <value>jdbc:interbase://localhost/opt/data/lportal.gdb</value>
        </parameter>
        <parameter>
            <name>username</name>
            <value>sysdba</value>
        </parameter>
        <parameter>
            <name>password</name>
            <value>masterkey</value>
        </parameter>
    </ResourceParams>
</Context>

Copy the JDBC driver for InterBase to /common/lib. JDBC Drivers can be found from the database vendor's web site.

l.   WebLogic with InterBase

Use the Administration Console to do the following:

Create a connection pool using jdbc:interbase://localhost/opt/data/lportal.gdb as the URL, interbase.interclient.Driver as the driver, "sysdba" as the user name, and "masterkey" as the password.

Create a data source bound to jdbc/LiferayPool.

Create a Tx data source bound to jdbc/LiferayEJB.

m.   WebSphere with InterBase

Use the Administrative Console: Resources -> JDBC Providers.

Create a new user-defined JDBC provider. Remove any references in the class path. Set org.apache.commons.dbcp.cpdsadapter.DriverAdapterCPDS as the implementation class name.

Copy commons-dbcp.jar, commons-pool.jar, and your JDBC driver to /AppServer/lib/ext.

Create a data source bound to jdbc/LiferayPool. The custom properties are driver=interbase.interclient.Driver, url=jdbc:interbase://localhost/opt/data/lportal.gdb, username=sysdba, and password=masterkey.

V.   MySQL

 
a.   Create a database in MySQL called lportal. At your UNIX shell or DOS prompt, type mysql lportal < portal-mysql.sql.

Note: As of version 1.8.0, the old JDBC driver org.gjt.mm.mysql.Driver is replaced with the latest JDBC driver com.mysql.jdbc.Driver. The old driver stored booleans in columns of type enum('t', 'f'), the new driver stores booleans in columns of type tinyint.

To manually update your column type, execute the SQL command alter table TableName modify column columnName tinyint;. To automatically update all your tables, execute the SQL script update1.7.5-1.8.0-mysql.sql.

b.   JBoss with MySQL

Create a data source bound to jdbc/LiferayPool by editing liferay-ds.xml.

<datasources>
   <local-tx-datasource>
     <jndi-name>jdbc/LiferayPool</jndi-name>
     <connection-url>
         jdbc:mysql://localhost/lportal
     </connection-url>
     <driver-class>com.mysql.jdbc.Driver</driver-class>
     <user-name>test</user-name>
     <password>test</password>
     <min-pool-size>0</min-pool-size>
   </local-tx-datasource>
</datasources>

Copy the JDBC driver for MySQL to /server/default/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

c.   Jetty with MySQL

Create a data source bound to jdbc/LiferayPool by editing /etc/jetty.xml.

<Call name="addService">
    <Arg>
        <New class="org.mortbay.jetty.plus.JotmService">
            <Set name="Name">TransactionMgr</Set>
            <Call name="addDataSource">
                <Arg>jdbc/LiferayPool</Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.standard.StandardXADataSource">
                        <Set name="DriverName">com.mysql.jdbc.Driver</Set>
                        <Set name="Url">jdbc:mysql://localhost/lportal</Set>
                        <Set name="User">test</Set>
                        <Set name="Password">test</Set>
                    </New>
                </Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.pool.StandardXAPoolDataSource">
                        <Arg type="Integer">4</Arg>
                        <Set name="MinSize">4</Set>
                        <Set name="MaxSize">15</Set>
                    </New>
                </Arg>
            </Call>
        </New>
    </Arg>
</Call>

Copy the JDBC driver for MySQL to /lib. JDBC Drivers can be found from the database vendor's web site.

d.   JOnAS with MySQL

Create a data source bound to jdbc/LiferayPool by editing /conf/jonas/liferay-ds.properties.

datasource.name=jdbc/LiferayPool
datasource.url=jdbc:mysql://localhost/lportal
datasource.classname=com.mysql.jdbc.Driver
datasource.username=test
datasource.password=test
datasource.mapper=rdb.mysql

Copy the JDBC driver for MySQL to /lib/ext. JDBC Drivers can be found from the database vendor's web site.

e.   JRun with MySQL

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:mysql://localhost/lportal as the URL, com.mysql.jdbc.Driver as the driver, "test" as the user name, and "test" as the password.

f.   Oracle9iAS with MySQL

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="com.mysql.jdbc.Driver"
    url="jdbc:mysql://localhost/lportal"
    username="test"
    password="test"
    inactivity-timeout="30"
    schema="database-schemas/mysql.xml"
/>

Copy the JDBC driver for MySQL to /j2ee/home/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

g.   Orion with MySQL

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="com.mysql.jdbc.Driver"
    url="jdbc:mysql://localhost/lportal"
    username="test"
    password="test"
    inactivity-timeout="30"
    schema="database-schemas/mysql.xml"
/>

Copy the JDBC driver for MySQL to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

h.   Pramati with MySQL

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:mysql://localhost/lportal as the URL, com.mysql.jdbc.Driver as the driver, "test" as the user name, and "test" as the password.

i.   RexIP with MySQL

Create a data source bound to jdbc/LiferayPool and set the proper JDBC properties by editing /server.xml.

<datasource
    name="LiferayPool"
    jndi-name="jdbc/LiferayPool"
    driver="com.mysql.jdbc.Driver"
    url="jdbc:mysql://localhost/lportal"
    username="test"
    password="test"
    max-pool="100"
    transactional="false"
/>

Copy the JDBC driver for MySQL to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

j.   Sun JSAS with MySQL

Use the Administration Console to do the following:

Create a connection pool org.apache.commons.dbcp.BasicDataSource as the data source class. The pool properties are driverClassName=com.mysql.jdbc.Driver, url=jdbc:mysql://localhost/lportal, username=test, and password=test.

Create a data source bound to jdbc/LiferayPool.

k.   Tomcat with MySQL

Create a data source bound to jdbc/LiferayPool by editing /conf/Catalina/localhost/liferay.xml.

<Context...>
    ...
    <Resource
        name="jdbc/LiferayPool"
        auth="Container"
        type="javax.sql.DataSource"
    />
    <ResourceParams name="jdbc/LiferayPool">
        <parameter>
            <name>driverClassName</name>
            <value>com.mysql.jdbc.Driver</value>
        </parameter>
        <parameter>
            <name>url</name>
            <value>jdbc:mysql://localhost/lportal</value>
        </parameter>
        <parameter>
            <name>username</name>
            <value>test</value>
        </parameter>
        <parameter>
            <name>password</name>
            <value>test</value>
        </parameter>
    </ResourceParams>
</Context>

Copy the JDBC driver for MySQL to /common/lib. JDBC Drivers can be found from the database vendor's web site.

l.   WebLogic with MySQL

Use the Administration Console to do the following:

Create a connection pool using jdbc:mysql://localhost/lportal as the URL, com.mysql.jdbc.Driver as the driver, "test" as the user name, and "test" as the password.

Create a data source bound to jdbc/LiferayPool.

Create a Tx data source bound to jdbc/LiferayEJB.

m.   WebSphere with MySQL

Use the Administrative Console: Resources -> JDBC Providers.

Create a new user-defined JDBC provider. Remove any references in the class path. Set org.apache.commons.dbcp.cpdsadapter.DriverAdapterCPDS as the implementation class name.

Copy commons-dbcp.jar, commons-pool.jar, and your JDBC driver to /AppServer/lib/ext.

Create a data source bound to jdbc/LiferayPool. The custom properties are driver=com.mysql.jdbc.Driver, url=jdbc:mysql://localhost/lportal, username=test, and password=test.

VI.   Oracle

 
a.   Create a database in Oracle called lportal. Go to SQL Plus and type @/portal-ejb/src/portal-oracle.sql;.

Note: There is a bug with with the Oracle JDBC driver which will not allow O/R tools to access columns over 4 kb. This affects some of the functionality of the portal. A workaround is to use the Liferay JDBC driver that acts as a wrapper to ensure that columns over 4 kb read and persist properly. The Liferay JDBC driver determines which actual driver to load based on the connection URL. If you pass in a URL that contains the string jdbc:oracle:thin, it will know to load oracle.jdbc.driver.OracleDriver.

b.   JBoss with Oracle

Create a data source bound to jdbc/LiferayPool by editing liferay-ds.xml.

<datasources>
   <local-tx-datasource>
     <jndi-name>jdbc/LiferayPool</jndi-name>
     <connection-url>
         jdbc:oracle:thin:@localhost:1521:lportal
     </connection-url>
     <driver-class>com.liferay.jdbc.LiferayDriver</driver-class>
     <user-name>test</user-name>
     <password>test</password>
     <min-pool-size>0</min-pool-size>
   </local-tx-datasource>
</datasources>

Copy the JDBC driver for Oracle to /server/default/lib. JDBC Drivers can be found from the database vendor's web site.

Note: On startup, JBoss will throw a org.jboss.util.NestedSQLException with the message "Apparently wrong driver class specified for URL." That message comes up because we are using a wrapper for the Oracle driver. The Liferay driver will continue to work and the message can be ignored.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

c.   Jetty with Oracle

Create a data source bound to jdbc/LiferayPool by editing /etc/jetty.xml.

<Call name="addService">
    <Arg>
        <New class="org.mortbay.jetty.plus.JotmService">
            <Set name="Name">TransactionMgr</Set>
            <Call name="addDataSource">
                <Arg>jdbc/LiferayPool</Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.standard.StandardXADataSource">
                        <Set name="DriverName">com.liferay.jdbc.LiferayDriver</Set>
                        <Set name="Url">jdbc:oracle:thin:@localhost:1521:lportal</Set>
                        <Set name="User">test</Set>
                        <Set name="Password">test</Set>
                    </New>
                </Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.pool.StandardXAPoolDataSource">
                        <Arg type="Integer">4</Arg>
                        <Set name="MinSize">4</Set>
                        <Set name="MaxSize">15</Set>
                    </New>
                </Arg>
            </Call>
        </New>
    </Arg>
</Call>

Copy the JDBC driver for Oracle to /lib. JDBC Drivers can be found from the database vendor's web site.

d.   JOnAS with Oracle

Create a data source bound to jdbc/LiferayPool by editing /conf/jonas/liferay-ds.properties.

datasource.name=jdbc/LiferayPool
datasource.url=jdbc:oracle:thin:@localhost:1521:lportal
datasource.classname=com.liferay.jdbc.LiferayDriver
datasource.username=test
datasource.password=test
datasource.mapper=rdb.oracle

Copy the JDBC driver for Oracle to /lib/ext. JDBC Drivers can be found from the database vendor's web site.

e.   JRun with Oracle

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:oracle:thin:@localhost:1521:lportal as the URL, com.liferay.jdbc.LiferayDriver as the driver, "test" as the user name, and "test" as the password.

f.   Oracle9iAS with Oracle

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="com.liferay.jdbc.LiferayDriver"
    url="jdbc:oracle:thin:@localhost:1521:lportal"
    username="test"
    password="test"
    inactivity-timeout="30"
    schema="database-schemas/oracle.xml"
/>

Copy the JDBC driver for Oracle to /j2ee/home/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

g.   Orion with Oracle

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="com.liferay.jdbc.LiferayDriver"
    url="jdbc:oracle:thin:@localhost:1521:lportal"
    username="test"
    password="test"
    inactivity-timeout="30"
    schema="database-schemas/oracle.xml"
/>

Copy the JDBC driver for Oracle to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

h.   Pramati with Oracle

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:oracle:thin:@localhost:1521:lportal as the URL, com.liferay.jdbc.LiferayDriver as the driver, "test" as the user name, and "test" as the password.

i.   RexIP with Oracle

Create a data source bound to jdbc/LiferayPool and set the proper JDBC properties by editing /server.xml.

<datasource
    name="LiferayPool"
    jndi-name="jdbc/LiferayPool"
    driver="com.liferay.jdbc.LiferayDriver"
    url="jdbc:oracle:thin:@localhost:1521:lportal"
    username="test"
    password="test"
    max-pool="100"
    transactional="false"
/>

Copy the JDBC driver for Oracle to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

j.   Sun JSAS with Oracle

Use the Administration Console to do the following:

Create a connection pool org.apache.commons.dbcp.BasicDataSource as the data source class. The pool properties are driverClassName=com.liferay.jdbc.LiferayDriver, url=jdbc:oracle:thin:@localhost:1521:lportal, username=test, and password=test.

Create a data source bound to jdbc/LiferayPool.

k.   Tomcat with Oracle

Create a data source bound to jdbc/LiferayPool by editing /conf/Catalina/localhost/liferay.xml.

<Context...>
    ...
    <Resource
        name="jdbc/LiferayPool"
        auth="Container"
        type="javax.sql.DataSource"
    />
    <ResourceParams name="jdbc/LiferayPool">
        <parameter>
            <name>driverClassName</name>
            <value>com.liferay.jdbc.LiferayDriver</value>
        </parameter>
        <parameter>
            <name>url</name>
            <value>jdbc:oracle:thin:@localhost:1521:lportal</value>
        </parameter>
        <parameter>
            <name>username</name>
            <value>test</value>
        </parameter>
        <parameter>
            <name>password</name>
            <value>test</value>
        </parameter>
    </ResourceParams>
</Context>

Copy the JDBC driver for Oracle to /common/lib. JDBC Drivers can be found from the database vendor's web site.

l.   WebLogic with Oracle

Use the Administration Console to do the following:

Create a connection pool using jdbc:oracle:thin:@localhost:1521:lportal as the URL, com.liferay.jdbc.LiferayDriver as the driver, "test" as the user name, and "test" as the password.

Create a data source bound to jdbc/LiferayPool.

Create a Tx data source bound to jdbc/LiferayEJB.

m.   WebSphere with Oracle

Use the Administrative Console: Resources -> JDBC Providers.

Create a new user-defined JDBC provider. Remove any references in the class path. Set org.apache.commons.dbcp.cpdsadapter.DriverAdapterCPDS as the implementation class name.

Copy commons-dbcp.jar, commons-pool.jar, and your JDBC driver to /AppServer/lib/ext.

Create a data source bound to jdbc/LiferayPool. The custom properties are driver=com.liferay.jdbc.LiferayDriver, url=jdbc:oracle:thin:@localhost:1521:lportal, username=test, and password=test.

VII.   PostgreSQL

 
a.   Create a database in PostgreSQL called lportal. At your UNIX shell, type psql -d lportal -f portal-postgresql.sql.

b.   JBoss with PostgreSQL

Create a data source bound to jdbc/LiferayPool by editing liferay-ds.xml.

<datasources>
   <local-tx-datasource>
     <jndi-name>jdbc/LiferayPool</jndi-name>
     <connection-url>
         jdbc:postgresql://localhost/lportal
     </connection-url>
     <driver-class>org.postgresql.Driver</driver-class>
     <user-name>test</user-name>
     <password>test</password>
     <min-pool-size>0</min-pool-size>
   </local-tx-datasource>
</datasources>

Copy the JDBC driver for PostgreSQL to /server/default/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

c.   Jetty with PostgreSQL

Create a data source bound to jdbc/LiferayPool by editing /etc/jetty.xml.

<Call name="addService">
    <Arg>
        <New class="org.mortbay.jetty.plus.JotmService">
            <Set name="Name">TransactionMgr</Set>
            <Call name="addDataSource">
                <Arg>jdbc/LiferayPool</Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.standard.StandardXADataSource">
                        <Set name="DriverName">org.postgresql.Driver</Set>
                        <Set name="Url">jdbc:postgresql://localhost/lportal</Set>
                        <Set name="User">test</Set>
                        <Set name="Password">test</Set>
                    </New>
                </Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.pool.StandardXAPoolDataSource">
                        <Arg type="Integer">4</Arg>
                        <Set name="MinSize">4</Set>
                        <Set name="MaxSize">15</Set>
                    </New>
                </Arg>
            </Call>
        </New>
    </Arg>
</Call>

Copy the JDBC driver for PostgreSQL to /lib. JDBC Drivers can be found from the database vendor's web site.

d.   JOnAS with PostgreSQL

Create a data source bound to jdbc/LiferayPool by editing /conf/jonas/liferay-ds.properties.

datasource.name=jdbc/LiferayPool
datasource.url=jdbc:postgresql://localhost/lportal
datasource.classname=org.postgresql.Driver
datasource.username=test
datasource.password=test
datasource.mapper=rdb.postgres

Copy the JDBC driver for PostgreSQL to /lib/ext. JDBC Drivers can be found from the database vendor's web site.

e.   JRun with PostgreSQL

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:postgresql://localhost/lportal as the URL, org.postgresql.Driver as the driver, "test" as the user name, and "test" as the password.

f.   Oracle9iAS with PostgreSQL

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="org.postgresql.Driver"
    url="jdbc:postgresql://localhost/lportal"
    username="test"
    password="test"
    inactivity-timeout="30"
    schema="database-schemas/postgresql.xml"
/>

Copy the JDBC driver for PostgreSQL to /j2ee/home/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

g.   Orion with PostgreSQL

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="org.postgresql.Driver"
    url="jdbc:postgresql://localhost/lportal"
    username="test"
    password="test"
    inactivity-timeout="30"
    schema="database-schemas/postgresql.xml"
/>

Copy the JDBC driver for PostgreSQL to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

h.   Pramati with PostgreSQL

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:postgresql://localhost/lportal as the URL, org.postgresql.Driver as the driver, "test" as the user name, and "test" as the password.

i.   RexIP with PostgreSQL

Create a data source bound to jdbc/LiferayPool and set the proper JDBC properties by editing /server.xml.

<datasource
    name="LiferayPool"
    jndi-name="jdbc/LiferayPool"
    driver="org.postgresql.Driver"
    url="jdbc:postgresql://localhost/lportal"
    username="test"
    password="test"
    max-pool="100"
    transactional="false"
/>

Copy the JDBC driver for PostgreSQL to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

j.   Sun JSAS with PostgreSQL

Use the Administration Console to do the following:

Create a connection pool org.apache.commons.dbcp.BasicDataSource as the data source class. The pool properties are driverClassName=org.postgresql.Driver, url=jdbc:postgresql://localhost/lportal, username=test, and password=test.

Create a data source bound to jdbc/LiferayPool.

k.   Tomcat with PostgreSQL

Create a data source bound to jdbc/LiferayPool by editing /conf/Catalina/localhost/liferay.xml.

<Context...>
    ...
    <Resource
        name="jdbc/LiferayPool"
        auth="Container"
        type="javax.sql.DataSource"
    />
    <ResourceParams name="jdbc/LiferayPool">
        <parameter>
            <name>driverClassName</name>
            <value>org.postgresql.Driver</value>
        </parameter>
        <parameter>
            <name>url</name>
            <value>jdbc:postgresql://localhost/lportal</value>
        </parameter>
        <parameter>
            <name>username</name>
            <value>test</value>
        </parameter>
        <parameter>
            <name>password</name>
            <value>test</value>
        </parameter>
    </ResourceParams>
</Context>

Copy the JDBC driver for PostgreSQL to /common/lib. JDBC Drivers can be found from the database vendor's web site.

l.   WebLogic with PostgreSQL

Use the Administration Console to do the following:

Create a connection pool using jdbc:postgresql://localhost/lportal as the URL, org.postgresql.Driver as the driver, "test" as the user name, and "test" as the password.

Create a data source bound to jdbc/LiferayPool.

Create a Tx data source bound to jdbc/LiferayEJB.

m.   WebSphere with PostgreSQL

Use the Administrative Console: Resources -> JDBC Providers.

Create a new user-defined JDBC provider. Remove any references in the class path. Set org.apache.commons.dbcp.cpdsadapter.DriverAdapterCPDS as the implementation class name.

Copy commons-dbcp.jar, commons-pool.jar, and your JDBC driver to /AppServer/lib/ext.

Create a data source bound to jdbc/LiferayPool. The custom properties are driver=org.postgresql.Driver, url=jdbc:postgresql://localhost/lportal, username=test, and password=test.

VIII.   SAP

 
a.   Create a database in SAP called lportal. Load the script named portal-sap.sql.

b.   JBoss with SAP

Create a data source bound to jdbc/LiferayPool by editing liferay-ds.xml.

<datasources>
   <local-tx-datasource>
     <jndi-name>jdbc/LiferayPool</jndi-name>
     <connection-url>
         jdbc:sapdb://localhost/lportal
     </connection-url>
     <driver-class>com.sap.dbtech.jdbc.DriverSapDB</driver-class>
     <user-name>test</user-name>
     <password>test</password>
     <min-pool-size>0</min-pool-size>
   </local-tx-datasource>
</datasources>

Copy the JDBC driver for SAP to /server/default/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

c.   Jetty with SAP

Create a data source bound to jdbc/LiferayPool by editing /etc/jetty.xml.

<Call name="addService">
    <Arg>
        <New class="org.mortbay.jetty.plus.JotmService">
            <Set name="Name">TransactionMgr</Set>
            <Call name="addDataSource">
                <Arg>jdbc/LiferayPool</Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.standard.StandardXADataSource">
                        <Set name="DriverName">com.sap.dbtech.jdbc.DriverSapDB</Set>
                        <Set name="Url">jdbc:sapdb://localhost/lportal</Set>
                        <Set name="User">test</Set>
                        <Set name="Password">test</Set>
                    </New>
                </Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.pool.StandardXAPoolDataSource">
                        <Arg type="Integer">4</Arg>
                        <Set name="MinSize">4</Set>
                        <Set name="MaxSize">15</Set>
                    </New>
                </Arg>
            </Call>
        </New>
    </Arg>
</Call>

Copy the JDBC driver for SAP to /lib. JDBC Drivers can be found from the database vendor's web site.

d.   JOnAS with SAP

Create a data source bound to jdbc/LiferayPool by editing /conf/jonas/liferay-ds.properties.

datasource.name=jdbc/LiferayPool
datasource.url=jdbc:sapdb://localhost/lportal
datasource.classname=com.sap.dbtech.jdbc.DriverSapDB
datasource.username=test
datasource.password=test
datasource.mapper=rdb.sapdb

Copy the JDBC driver for SAP to /lib/ext. JDBC Drivers can be found from the database vendor's web site.

e.   JRun with SAP

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:sapdb://localhost/lportal as the URL, com.sap.dbtech.jdbc.DriverSapDB as the driver, "test" as the user name, and "test" as the password.

f.   Oracle9iAS with SAP

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="com.sap.dbtech.jdbc.DriverSapDB"
    url="jdbc:sapdb://localhost/lportal"
    username="test"
    password="test"
    inactivity-timeout="30"
/>

Copy the JDBC driver for SAP to /j2ee/home/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

g.   Orion with SAP

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="com.sap.dbtech.jdbc.DriverSapDB"
    url="jdbc:sapdb://localhost/lportal"
    username="test"
    password="test"
    inactivity-timeout="30"
/>

Copy the JDBC driver for SAP to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

h.   Pramati with SAP

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:sapdb://localhost/lportal as the URL, com.sap.dbtech.jdbc.DriverSapDB as the driver, "test" as the user name, and "test" as the password.

i.   RexIP with SAP

Create a data source bound to jdbc/LiferayPool and set the proper JDBC properties by editing /server.xml.

<datasource
    name="LiferayPool"
    jndi-name="jdbc/LiferayPool"
    driver="com.sap.dbtech.jdbc.DriverSapDB"
    url="jdbc:sapdb://localhost/lportal"
    username="test"
    password="test"
    max-pool="100"
    transactional="false"
/>

Copy the JDBC driver for SAP to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

j.   Sun JSAS with SAP

Use the Administration Console to do the following:

Create a connection pool org.apache.commons.dbcp.BasicDataSource as the data source class. The pool properties are driverClassName=com.sap.dbtech.jdbc.DriverSapDB, url=jdbc:sapdb://localhost/lportal, username=test, and password=test.

Create a data source bound to jdbc/LiferayPool.

k.   Tomcat with SAP

Create a data source bound to jdbc/LiferayPool by editing /conf/Catalina/localhost/liferay.xml.

<Context...>
    ...
    <Resource
        name="jdbc/LiferayPool"
        auth="Container"
        type="javax.sql.DataSource"
    />
    <ResourceParams name="jdbc/LiferayPool">
        <parameter>
            <name>driverClassName</name>
            <value>com.sap.dbtech.jdbc.DriverSapDB</value>
        </parameter>
        <parameter>
            <name>url</name>
            <value>jdbc:sapdb://localhost/lportal</value>
        </parameter>
        <parameter>
            <name>username</name>
            <value>test</value>
        </parameter>
        <parameter>
            <name>password</name>
            <value>test</value>
        </parameter>
    </ResourceParams>
</Context>

Copy the JDBC driver for SAP to /common/lib. JDBC Drivers can be found from the database vendor's web site.

l.   WebLogic with SAP

Use the Administration Console to do the following:

Create a connection pool using jdbc:sapdb://localhost/lportal as the URL, com.sap.dbtech.jdbc.DriverSapDB as the driver, "test" as the user name, and "test" as the password.

Create a data source bound to jdbc/LiferayPool.

Create a Tx data source bound to jdbc/LiferayEJB.

m.   WebSphere with SAP

Use the Administrative Console: Resources -> JDBC Providers.

Create a new user-defined JDBC provider. Remove any references in the class path. Set org.apache.commons.dbcp.cpdsadapter.DriverAdapterCPDS as the implementation class name.

Copy commons-dbcp.jar, commons-pool.jar, and your JDBC driver to /AppServer/lib/ext.

Create a data source bound to jdbc/LiferayPool. The custom properties are driver=com.sap.dbtech.jdbc.DriverSapDB, url=jdbc:sapdb://localhost/lportal, username=test, and password=test.

IX.   SQL Server

 
a.   Create a database in SQL Server called lportal. Use Enterprise Manager to load the script named portal-sql-server.sql.

b.   JBoss with SQL Server

Create a data source bound to jdbc/LiferayPool by editing liferay-ds.xml.

<datasources>
   <local-tx-datasource>
     <jndi-name>jdbc/LiferayPool</jndi-name>
     <connection-url>
         jdbc:jtds:sqlserver://localhost/lportal
     </connection-url>
     <driver-class>net.sourceforge.jtds.jdbc.Driver</driver-class>
     <user-name>test</user-name>
     <password>test</password>
     <min-pool-size>0</min-pool-size>
   </local-tx-datasource>
</datasources>

Copy the JDBC driver for SQL Server to /server/default/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

c.   Jetty with SQL Server

Create a data source bound to jdbc/LiferayPool by editing /etc/jetty.xml.

<Call name="addService">
    <Arg>
        <New class="org.mortbay.jetty.plus.JotmService">
            <Set name="Name">TransactionMgr</Set>
            <Call name="addDataSource">
                <Arg>jdbc/LiferayPool</Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.standard.StandardXADataSource">
                        <Set name="DriverName">net.sourceforge.jtds.jdbc.Driver</Set>
                        <Set name="Url">jdbc:jtds:sqlserver://localhost/lportal</Set>
                        <Set name="User">test</Set>
                        <Set name="Password">test</Set>
                    </New>
                </Arg>
                <Arg>
                    <New class="org.enhydra.jdbc.pool.StandardXAPoolDataSource">
                        <Arg type="Integer">4</Arg>
                        <Set name="MinSize">4</Set>
                        <Set name="MaxSize">15</Set>
                    </New>
                </Arg>
            </Call>
        </New>
    </Arg>
</Call>

Copy the JDBC driver for SQL Server to /lib. JDBC Drivers can be found from the database vendor's web site.

d.   JOnAS with SQL Server

Create a data source bound to jdbc/LiferayPool by editing /conf/jonas/liferay-ds.properties.

datasource.name=jdbc/LiferayPool
datasource.url=jdbc:jtds:sqlserver://localhost/lportal
datasource.classname=net.sourceforge.jtds.jdbc.Driver
datasource.username=test
datasource.password=test
datasource.mapper=rdb.sybase

Copy the JDBC driver for SQL Server to /lib/ext. JDBC Drivers can be found from the database vendor's web site.

e.   JRun with SQL Server

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:jtds:sqlserver://localhost/lportal as the URL, net.sourceforge.jtds.jdbc.Driver as the driver, "test" as the user name, and "test" as the password.

f.   Oracle9iAS with SQL Server

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="net.sourceforge.jtds.jdbc.Driver"
    url="jdbc:jtds:sqlserver://localhost/lportal"
    username="test"
    password="test"
    inactivity-timeout="30"
    schema="database-schemas/ms-sql.xml"
/>

Copy the JDBC driver for SQL Server to /j2ee/home/lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

g.   Orion with SQL Server

Create a data source bound to jdbc/LiferayPool, create a Tx data source bound to jdbc/LiferayEJB, and set the proper JDBC properties by editing /config/data-sources.xml.

<data-source
    class="com.evermind.sql.DriverManagerDataSource"
    name="Liferay"
    location="jdbc/LiferayCore"
    pooled-location="jdbc/LiferayPool"
    xa-location="jdbc/xa/LiferayXA"
    ejb-location="jdbc/LiferayEJB"
    connection-driver="net.sourceforge.jtds.jdbc.Driver"
    url="jdbc:jtds:sqlserver://localhost/lportal"
    username="test"
    password="test"
    inactivity-timeout="30"
    schema="database-schemas/ms-sql.xml"
/>

Copy the JDBC driver for SQL Server to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

h.   Pramati with SQL Server

Use the Management Console to do the following:

Create a data source bound to jdbc/LiferayPool using jdbc:jtds:sqlserver://localhost/lportal as the URL, net.sourceforge.jtds.jdbc.Driver as the driver, "test" as the user name, and "test" as the password.

i.   RexIP with SQL Server

Create a data source bound to jdbc/LiferayPool and set the proper JDBC properties by editing /server.xml.

<datasource
    name="LiferayPool"
    jndi-name="jdbc/LiferayPool"
    driver="net.sourceforge.jtds.jdbc.Driver"
    url="jdbc:jtds:sqlserver://localhost/lportal"
    username="test"
    password="test"
    max-pool="100"
    transactional="false"
/>

Copy the JDBC driver for SQL Server to /lib. JDBC Drivers can be found from the database vendor's web site.

Make sure there isn't already another data source bound to jdbc/LiferayPool. If there is a duplicate service, undeploy it by removing its xml configuration.

j.   Sun JSAS with SQL Server

Use the Administration Console to do the following:

Create a connection pool org.apache.commons.dbcp.BasicDataSource as the data source class. The pool properties are driverClassName=net.sourceforge.jtds.jdbc.Driver, url=jdbc:jtds:sqlserver://localhost/lportal, username=test, and password=test.

Create a data source bound to jdbc/LiferayPool.

k.   Tomcat with SQL Server

Create a data source bound to jdbc/LiferayPool by editing /conf/Catalina/localhost/liferay.xml.

<Context...>
    ...
    <Resource
        name="jdbc/LiferayPool"
        auth="Container"
        type="javax.sql.DataSource"
    />
    <ResourceParams name="jdbc/LiferayPool">
        <parameter>
            <name>driverClassName</name>
            <value>net.sourceforge.jtds.jdbc.Driver</value>
        </parameter>
        <parameter>
            <name>url</name>
            <value>jdbc:jtds:sqlserver://localhost/lportal</value>
        </parameter>
        <parameter>
            <name>username</name>
            <value>test</value>
        </parameter>
        <parameter>
            <name>password</name>
            <value>test</value>
        </parameter>
    </ResourceParams>
</Context>

Copy the JDBC driver for SQL Server to /common/lib. JDBC Drivers can be found from the database vendor's web site.

l.   WebLogic with SQL Server

Use the Administration Console to do the following:

Create a connection pool using jdbc:jtds:sqlserver://localhost/lportal as the URL, net.sourceforge.jtds.jdbc.Driver as the driver, "test" as the user name, and "test" as the password.

Create a data source bound to jdbc/LiferayPool.

Create a Tx data source bound to jdbc/LiferayEJB.

m.   WebSphere with SQL Server

Use the Administrative Console: Resources -> JDBC Providers.

Create a new user-defined JDBC provider. Remove any references in the class path. Set org.apache.commons.dbcp.cpdsadapter.DriverAdapterCPDS as the implementation class name.

Copy commons-dbcp.jar, commons-pool.jar, and your JDBC driver to /AppServer/lib/ext.

Create a data source bound to jdbc/LiferayPool. The custom properties are driver=net.sourceforge.jtds.jdbc.Driver, url=jdbc:jtds:sqlserver://localhost/lportal, username=test, and password=test.

只有注册用户登录后才能发表评论。


网站导航: