Overview

The <windowsAuthentication> element defines configuration settings for the Internet Information Services (IIS) 7 Windows authentication module. You can use Windows authentication when your IIS 7 server runs on a corporate network that is using Microsoft Active Directory service domain identities or other Windows accounts to identify users. Because of this, you can use Windows authentication whether or not your server is a member of an Active Directory domain.

Windows authentication (formerly named NTLM, and also referred to as Windows NT Challenge/Response authentication) is a secure form of authentication because the user name and password are hashed before being sent across the network. When you enable Windows authentication, the client browser sends a strongly hashed version of the password in a cryptographic exchange with your Web server.

Windows authentication supports two authentication protocols, Kerberos and NTLM, which are defined in the <providers> element. When you install and enable Windows authentication on IIS 7, the default protocol is Kerberos. The <windowsAuthentication> element can also contain a useKernelMode attribute that configures whether to use the kernel mode authentication feature that is new to Windows Server 2008.

Windows authentication is best suited for an intranet environment for the following reasons:

• Client computers and Web servers are in the same domain.
• Administrators can make sure that every client browser is Internet Explorer 2.0 or later.
• HTTP proxy connections, which are not supported by NTLM, are not required.
• Kerberos version 5 requires a connection to Active Directory, which is not feasible in an Internet environment.

New in IIS 7.5

The <extendedProtection> element was introduced in IIS 7.5, which allows you to configure the settings for the new extended protection features that have been integrated into Windows authentication.

Compatibility

Setup

The default installation of IIS 7 does not include the Windows authentication role service. To use Windows authentication on IIS, you must install the role service, disable Anonymous authentication for your Web site or application, and then enable Windows authentication for the site or application.

Note: After you install the role service, IIS 7 commits the following configuration settings to the ApplicationHost.config file.

<windowsAuthentication enabled="false" />

Windows Server 2008 or Windows Server 2008 R2

1. On the taskbar, click Start, point to Administrative Tools, and then click Server Manager.
2. In the Server Manager hierarchy pane, expand Roles, and then click Web Server (IIS).
3. In the Web Server (IIS) pane, scroll to the Role Services section, and then click Add Role Services.
4. On the Select Role Services page of the Add Role Services Wizard, select Windows Authentication, and then click Next.
   
5. On the Confirm Installation Selections page, click Install.
6. On the Results page, click Close.

Windows Vista or Windows 7

1. On the taskbar, click Start, and then click Control Panel.
2. In Control Panel, click Programs and Features, and then click Turn Windows Features on or off.
3. Expand Internet Information Services, then World Wide Web Services, then Security.
4. Select Windows Authentication, and then click OK.
   

How To

How to enable Windows authentication for a Web site, Web application, or Web service

1. Open Internet Information Services (IIS) Manager:
   • If you are using Windows Server 2008 or Windows Server 2008 R2:
     • On the taskbar, click Start, point to Administrative Tools, and then click Internet Information Services (IIS) Manager.
   • If you are using Windows Vista or Windows 7:
     • On the taskbar, click Start, and then click Control Panel.
     • Double-click Administrative Tools, and then double-click Internet Information Services (IIS) Manager.
2. In the Connections pane, expand the server name, expand Sites, and then the site, application, or Web service for which you want to enable Windows authentication.
3. Scroll to the Security section in the Home pane, and then double-click Authentication.
4. In the Authentication pane, select Windows Authentication, and then click Enable in the Actions pane.
   

How to enable Extended Protection for Windows authentication

1. Open Internet Information Services (IIS) Manager:
   • If you are using Windows Server 2008 or Windows Server 2008 R2:
     • On the taskbar, click Start, point to Administrative Tools, and then click Internet Information Services (IIS) Manager.
   • If you are using Windows Vista or Windows 7:
     • On the taskbar, click Start, and then click Control Panel.
     • Double-click Administrative Tools, and then double-click Internet Information Services (IIS) Manager.
2. In the Connections pane, expand the server name, expand Sites, and then the site, application, or Web service for which you want to enable Extended Protection for Windows authentication.
3. Scroll to the Security section in the Home pane, and then double-click Authentication.
4. In the Authentication pane, select Windows Authentication.
5. Click Enable in the Actions pane.
   
6. Click Advanced Settings in the Actions pane.
7. When the Advanced Settings dialog box appears, select one of the following options in the Extended Protection drop-down menu:
   • Select Accept if you want to enable extended protection while providing down-level support for clients that do not support extended protection.
   • Select Required if you want to enable extended protection without providing down-level support.
     
8. Click OK to close the Advanced Settings dialog box.

Configuration

The <windowsAuthentication> element is configurable at the site, application, or virtual directory level in the ApplicationHost.config file.

Attributes

Child Elements

Configuration Sample

The following default <windowsAuthentication> element is configured at the root ApplicationHost.config file in IIS 7.0, and disables Windows authentication by default. It also defines the two Windows authentication providers for IIS 7.0.

<windowsAuthentication enabled="false">
   <providers>
      <add value="Negotiate" />
      <add value="NTLM" />
   </providers>
</windowsAuthentication>

The following example enables Windows authentication and disables Anonymous authentication for a Web site named Contoso.

<location path="Contoso">
   <system.webServer>
      <security>
         <authentication>
            <anonymousAuthentication enabled="false" />
            <windowsAuthentication enabled="true" />
         </authentication>
      </security>
   </system.webServer>
</location>

Sample Code

The following examples disable Anonymous authentication for a site named Contoso, then enable Windows authentication for the site.

AppCmd.exe

appcmd.exe set config "Contoso" -section:system.webServer/security/authentication/anonymousAuthentication /enabled:"False" /commit:apphost

appcmd.exe set config "Contoso" -section:system.webServer/security/authentication/windowsAuthentication /enabled:"True" /commit:apphost

Note: You must be sure to set the commit parameter to apphost when you use AppCmd.exe to configure these settings. This commits the configuration settings to the appropriate location section in the ApplicationHost.config file.

C#

using System;
using System.Text;
using Microsoft.Web.Administration;

internal static class Sample {

   private static void Main() {

      using(ServerManager serverManager = new ServerManager()) { 
         Configuration config = serverManager.GetApplicationHostConfiguration();

         ConfigurationSection anonymousAuthenticationSection = config.GetSection("system.webServer/security/authentication/anonymousAuthentication", "Contoso");
         anonymousAuthenticationSection["enabled"] = false;

         ConfigurationSection windowsAuthenticationSection = config.GetSection("system.webServer/security/authentication/windowsAuthentication", "Contoso");
         windowsAuthenticationSection["enabled"] = true;

         serverManager.CommitChanges();
      }
   }
}

VB.NET

Imports System
Imports System.Text
Imports Microsoft.Web.Administration

Module Sample
   Sub Main()
      Dim serverManager As ServerManager = New ServerManager
      Dim config As Configuration = serverManager.GetApplicationHostConfiguration

      Dim anonymousAuthenticationSection As ConfigurationSection = config.GetSection("system.webServer/security/authentication/anonymousAuthentication", "Contoso")
      anonymousAuthenticationSection("enabled") = False

      Dim windowsAuthenticationSection As ConfigurationSection = config.GetSection("system.webServer/security/authentication/windowsAuthentication", "Contoso")
      windowsAuthenticationSection("enabled") = True

      serverManager.CommitChanges()
   End Sub
End Module

JavaScript

var adminManager = new ActiveXObject('Microsoft.ApplicationHost.WritableAdminManager');
adminManager.CommitPath = "MACHINE/WEBROOT/APPHOST";

var anonymousAuthenticationSection = adminManager.GetAdminSection("system.webServer/security/authentication/anonymousAuthentication", "MACHINE/WEBROOT/APPHOST/Contoso");
anonymousAuthenticationSection.Properties.Item("enabled").Value = false;

var windowsAuthenticationSection = adminManager.GetAdminSection("system.webServer/security/authentication/windowsAuthentication", "MACHINE/WEBROOT/APPHOST/Contoso");
windowsAuthenticationSection.Properties.Item("enabled").Value = true;

adminManager.CommitChanges();

VBScript

Set adminManager = CreateObject("Microsoft.ApplicationHost.WritableAdminManager")
adminManager.CommitPath = "MACHINE/WEBROOT/APPHOST"

Set anonymousAuthenticationSection = adminManager.GetAdminSection("system.webServer/security/authentication/anonymousAuthentication", "MACHINE/WEBROOT/APPHOST/Contoso")
anonymousAuthenticationSection.Properties.Item("enabled").Value = False

Set windowsAuthenticationSection = adminManager.GetAdminSection("system.webServer/security/authentication/windowsAuthentication", "MACHINE/WEBROOT/APPHOST/Contoso")
windowsAuthenticationSection.Properties.Item("enabled").Value = True

adminManager.CommitChanges()

，那么，这个类如何使用呢？以下是使用该类的一个范例：

private GestureDetector mGestureDetector;

@Override

public void onCreate(Bundle savedInstanceState) {

  super.onCreate(savedInstanceState);

  mGestureDetector = new GestureDetector(this, new MyGestureListener());

}

@Override

public boolean onTouchEvent(MotionEvent event) {

 return mGestureDetector.onTouchEvent(event); 

/*  有关上面的 onTouchEvent方法，我们可以直接判断MotionEvent的类型，

}

class MyGestureListener extends GestureDetector.SimpleOnGestureListener{

  @Override

  public boolean onSingleTapUp(MotionEvent ev) {

    Log.d("onSingleTapUp",ev.toString());

    return true;

  }

  @Override

  public void onShowPress(MotionEvent ev) {

    Log.d("onShowPress",ev.toString());

  }

  @Override

  public void onLongPress(MotionEvent ev) {

    Log.d("onLongPress",ev.toString());

  }

更多的回调消息，方便的对用户的动作进行响应

public interface OnGestureListener {

                // Touch down时触发, e为down时的MotionEvent

                boolean onDown(MotionEvent e);

                // 在Touch down之后一定时间（115ms）触发，e为down时的MotionEvent

                void onShowPress(MotionEvent e);

                // Touch up时触发，e为up时的MotionEvent

                boolean onSingleTapUp(MotionEvent e);

                // 滑动时触发，e1为down时的MotionEvent，e2为move时的MotionEvent

                boolean onScroll(MotionEvent e1, MotionEvent e2, float distanceX, float distanceY);

                // 在Touch down之后一定时间（500ms）触发，e为down时的MotionEvent

                void onLongPress(MotionEvent e);

                // 滑动一段距离，up时触发，e1为down时的MotionEvent，e2为up时的MotionEvent

                boolean onFling(MotionEvent e1, MotionEvent e2, float velocityX, float velocityY);

} 

public interface OnDoubleTapListener {

                // 完成一次单击，并确定没有二击事件后触发（300ms），e为down时的MotionEvent

                boolean onSingleTapConfirmed(MotionEvent e);

                // 第二次单击down时触发，e为第一次down时的MotionEvent

                boolean onDoubleTap(MotionEvent e);

                // 第二次单击down,move和up时都触发，e为不同时机下的MotionEvent

                boolean onDoubleTapEvent(MotionEvent e);

}