文章档案

一，web服务器小论

　　以前的公司使用的web服务器是tomcat（tomcat+apache作集群）,现在的公司是一家互联网公司，采用的架构是resin+nginx作集群(resin比tomcat快？还有待以后章节比较讨论)，

集群配置服务器说明：

　　　 1),serve1:127.0.0.1:8080

　2), serve2:127.0.0.1:8081

　3), nginx:127.0.0.1:80

集群配置服务器说明：

　　　 1),serve1:127.0.0.1:8080

　2), serve2:127.0.0.1:8081

　3), nginx:127.0.0.1:80

二，配置resin服务器

　　(注：resin4之前，可以搭一个服务器，在<cluster></cluster>中配置多个server实例，通过实例启动，4.0之后就不可以了，要有专业版才能实现)

　　在安装resin之前，必须先安装完jvm环境。

　　serve1:127.0.0.1:8080--->

1，安装resin-4.0.*.tar.gz包

Java代码

1. shell $> tar zxvf resin-4.0.23.tar.gz
2. shell $> cd resin-4.0.23
3. shell $> ./configure --prefix=/usr/resin/resinserver1/resinserver1/
4. shell $> make
5. shell $> make install

shell $> tar zxvf resin-4.0.23.tar.gz shell $> cd resin-4.0.23 shell $> ./configure --prefix=/usr/resin/resinserver1/resinserver1/ shell $> make shell $> make install

　　2，配置resin.conf文件

　shell $> cd /usr/resin/resinserver1/resinserver1/

Java代码

1. shell $> cd conf
2. shell $> vim resin.conf
3. ## 查找 <http address="*" port="8080"/>
4. ## 注释掉 <!--http address="*" port="8080"/-->
5. ## 查找 <server id="" address="127.0.0.1" port="6800">
6. ## 替换成
7. <server id="resinserver1" address="127.0.0.1" port="6800">
8. <!--<strong>两台服务器配置不同的watchdog端口，否则会出现异常</strong>-->
9. <watchdog-port>6700</watchdog-port>
10. <http id="" port="8080"/>
11. </server>
12. ###重启 resin 服务#####
13. shell $> cd ../bin
14. shell $>./resin.sh -server resinserver1 start

shell $> cd conf shell $> vim resin.conf ##  查找     <http address="*" port="8080"/> ## 注释掉 <!--http address="*" port="8080"/--> ## 查找      <server id="" address="127.0.0.1" port="6800"> ## 替换成         <server id="resinserver1" address="127.0.0.1" port="6800">      <!--两台服务器配置不同的watchdog端口，否则会出现异常-->     <watchdog-port>6700</watchdog-port>     <http id="" port="8080"/>     </server> ###重启  resin 服务##### shell $> cd ../bin shell $>./resin.sh -server resinserver1 start 

serve1:127.0.0.1:8081--->

---1,

Java代码

1. shell $> tar zxvf resin-4.0.23.tar.gz
2. shell $> cd resin-4.0.23
3. shell $> ./configure --prefix=/usr/resin/resinserver2/resinserver2/
4. shell $> make
5. shell $> make install

shell $> tar zxvf resin-4.0.23.tar.gz shell $> cd resin-4.0.23 shell $> ./configure --prefix=/usr/resin/resinserver2/resinserver2/ shell $> make shell $> make install

2,配置resin

shell $> cd conf

Java代码

1. shell $> vim resin.conf
2. ## 查找 <http address="*" port="8080"/>
3. ## 注释掉 <!--http address="*" port="8080"/-->
4. ## 查找 <server id="" address="127.0.0.1" port="6800">
5. ## 替换成
6. <server id="resinserver2" address="127.0.0.1" port="6801">
7. <!--两台服务器配置不同的watchdog端口-->
8. <watchdog-port>6701</watchdog-port>
9. <http id="" port="8081"/>
10. </server>
11. ###重启 resin 服务#####
12. shell $> cd ../bin
13. shell $>./resin.sh -server resinserver2 start

shell $> vim resin.conf ##  查找     <http address="*" port="8080"/> ## 注释掉 <!--http address="*" port="8080"/--> ## 查找      <server id="" address="127.0.0.1" port="6800"> ## 替换成         <server id="resinserver2" address="127.0.0.1" port="6801">      <!--两台服务器配置不同的watchdog端口-->     <watchdog-port>6701</watchdog-port>     <http id="" port="8081"/>     </server> ###重启  resin 服务##### shell $> cd ../bin shell $>./resin.sh -server resinserver2 start

通过以上配置，开启两台resin服务器,接下来就是配置nginx

　三，nginx的配置

nginx安装需要以下软件包安装

　　1,nginx-1.1.5.tar.gz

2,tbje-nginx-upstream-jvm-route-6016b39.tar.gz

3,openssl-1.0.0e.tar.gz(OPENSSL不需要编译安装，只需要解压出来就行)

　　分别解压以上程序...

Java代码

1. shell $> cd nginx-1.1.5
2. shell $> patch -p0 < ../tbje-nginx-upstream-jvm-route-6016b39/jvm_route.patch
3. shell $> useradd www
4. shell $> ./configure --user=www --group=www --prefix=/usr/nginx/nginxserver --with-http_stub_status_module --with-http_ssl_module=/usr/nginx/openssl-1.0.0e --add-module=/usr/nginx/tbje-nginx-upstream-jvm-route-6016b39
5. shell $> make
6. shell $> make install

shell $> cd nginx-1.1.5 shell $> patch -p0 < ../tbje-nginx-upstream-jvm-route-6016b39/jvm_route.patch shell $> useradd www shell $> ./configure --user=www --group=www --prefix=/usr/nginx/nginxserver --with-http_stub_status_module --with-http_ssl_module=/usr/nginx/openssl-1.0.0e  --add-module=/usr/nginx/tbje-nginx-upstream-jvm-route-6016b39 shell $> make shell $> make install 

到nginxserver/sbin目录下，，运行./nginx　访问http://127.0.0.1 出现“webcome to nginx”代表nginx安装成功

　　四，配置集群

　　　打开nginxserver/conf/nginx.conf文件。

Java代码

1. user www www;#工作进程的属主
2. worker_processes 2;#工作进程数，一般与 CPU 核数等同
3. 
   
4. error_log logs/error.log crit;
5. #error_log logs/error.log notice;
6. #error_log logs/error.log info;
7. 
   
8. pid logs/nginx.pid;
9. 
   
10. 
    
11. events {
12. worker_connections 1024;#每个工作进程允许最大的同时连接数
13. }
14. 
    
15. 
    
16. http {
17. upstream backend {#集群服务器
18. server 127.0.0.1:8080 srun_id=resinserver1;
19. server 127.0.0.1:8081 srun_id=resinserver2;
20. jvm_route $cookie_JSESSIONID|sessionid;#session共享
21. }
22. 
    
23. include mime.types;#内定义各文件类型映像，也可使用
24. default_type application/octet-stream;#设置默认类型是二进制流
25. 
    
26. #log_format main '$remote_addr - $remote_user [$time_local] "$request" '
27. # '$status $body_bytes_sent "$http_referer" '
28. # '"$http_user_agent" "$http_x_forwarded_for"';
29. 
    
30. #access_log logs/access.log main;
31. 
    
32. sendfile on;
33. #tcp_nopush on;
34. 
    
35. #keepalive_timeout 0;
36. keepalive_timeout 65;
37. 
    
38. #gzip on;#打开gzip文件压缩
39. 
    
40. server {
41. listen 80;
42. server_name localhost;
43. 
    
44. charset UTF-8;
45. 
    
46. 　　　　#下面为location的配置，可以根据自己的业务情况进行定制
47. #access_log logs/host.access.log main;
48. location / {
49. root html;
50. index index.html index.htm;
51. }
52. 
    
53. #error_page 404 /404.html;
54. 
    
55. # redirect server error pages to the static page /50x.html
56. #
57. error_page 500 502 503 504 /50x.html;
58. location = /50x.html {
59. root html;
60. }
61. location ~ .*\.jsp$
62. {
63. proxy_pass http://backend;
64. proxy_redirect off;
65. proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
66. proxy_set_header X-Real-IP $remote_addr;
67. proxy_set_header Host $http_host;
68. }
69. location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$
70. {
71. expires 30d;
72. }
73. location ~ .*\.(js|css)?$
74. {
75. expires 1h;
76. }
77. 
    
78. # proxy the PHP scripts to Apache listening on 127.0.0.1:80
79. #
80. #location ~ \.php$ {
81. # proxy_pass http://127.0.0.1;
82. #}
83. 
    
84. # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
85. #
86. #location ~ \.php$ {
87. # root html;
88. # fastcgi_pass 127.0.0.1:9000;
89. # fastcgi_index index.php;
90. # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
91. # include fastcgi_params;
92. #}
93. 
    
94. # deny access to .htaccess files, if Apache's document root
95. # concurs with nginx's one
96. #
97. #location ~ /\.ht {
98. # deny all;
99. #}
100. }
101. 
     
102. 
     
103. # another virtual host using mix of IP-, name-, and port-based configuration
104. #
105. #server {
106. # listen 8000;
107. # listen somename:8080;
108. # server_name somename alias another.alias;
109. 
     
110. # location / {
111. # root html;
112. # index index.html index.htm;
113. # }
114. #}
115. 
     
116. 
     
117. # HTTPS server
118. #
119. #server {
120. # listen 443;
121. # server_name localhost;
122. 
     
123. # ssl on;
124. # ssl_certificate cert.pem;
125. # ssl_certificate_key cert.key;
126. 
     
127. # ssl_session_timeout 5m;
128. 
     
129. # ssl_protocols SSLv2 SSLv3 TLSv1;
130. # ssl_ciphers HIGH:!aNULL:!MD5;
131. # ssl_prefer_server_ciphers on;
132. 
     
133. # location / {
134. # root html;
135. # index index.html index.htm;
136. # }
137. #}
138. 
     
139. }

user  www www;#工作进程的属主 worker_processes  2;#工作进程数，一般与 CPU 核数等同  error_log  logs/error.log crit; #error_log  logs/error.log  notice; #error_log  logs/error.log  info;  pid        logs/nginx.pid;   events {     worker_connections  1024;#每个工作进程允许最大的同时连接数 }   http {         upstream backend {#集群服务器 	   server 127.0.0.1:8080 srun_id=resinserver1;  	   server 127.0.0.1:8081 srun_id=resinserver2; 	   jvm_route $cookie_JSESSIONID|sessionid;#session共享        }          include       mime.types;#内定义各文件类型映像，也可使用     default_type  application/octet-stream;#设置默认类型是二进制流      #log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '     #                  '$status $body_bytes_sent "$http_referer" '     #                  '"$http_user_agent" "$http_x_forwarded_for"';      #access_log  logs/access.log  main;      sendfile        on;     #tcp_nopush     on;      #keepalive_timeout  0;     keepalive_timeout  65;      #gzip  on;#打开gzip文件压缩      server {         listen       80;         server_name  localhost;          charset UTF-8;  　　　　#下面为location的配置，可以根据自己的业务情况进行定制         #access_log  logs/host.access.log  main;         location / {             root   html;             index  index.html index.htm;         }          #error_page  404              /404.html;          # redirect server error pages to the static page /50x.html         #         error_page   500 502 503 504  /50x.html;         location = /50x.html {             root   html;         }         	 location ~ .*\.jsp$ 	   { 	     proxy_pass  http://backend; 	     proxy_redirect    off; 	     proxy_set_header  X-Forwarded-For  $proxy_add_x_forwarded_for; 	     proxy_set_header  X-Real-IP  $remote_addr; 	     proxy_set_header  Host $http_host; 	   } 	   location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$ 	   { 	     expires      30d; 	   } 	   location ~ .*\.(js|css)?$ 	   { 	     expires      1h; 	   }          # proxy the PHP scripts to Apache listening on 127.0.0.1:80         #         #location ~ \.php$ {         #    proxy_pass   http://127.0.0.1;         #}          # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000         #         #location ~ \.php$ {         #    root           html;         #    fastcgi_pass   127.0.0.1:9000;         #    fastcgi_index  index.php;         #    fastcgi_param  SCRIPT_FILENAME  /scripts$fastcgi_script_name;         #    include        fastcgi_params;         #}          # deny access to .htaccess files, if Apache's document root         # concurs with nginx's one         #         #location ~ /\.ht {         #    deny  all;         #}     }       # another virtual host using mix of IP-, name-, and port-based configuration     #     #server {     #    listen       8000;     #    listen       somename:8080;     #    server_name  somename  alias  another.alias;      #    location / {     #        root   html;     #        index  index.html index.htm;     #    }     #}       # HTTPS server     #     #server {     #    listen       443;     #    server_name  localhost;      #    ssl                  on;     #    ssl_certificate      cert.pem;     #    ssl_certificate_key  cert.key;      #    ssl_session_timeout  5m;      #    ssl_protocols  SSLv2 SSLv3 TLSv1;     #    ssl_ciphers  HIGH:!aNULL:!MD5;     #    ssl_prefer_server_ciphers   on;      #    location / {     #        root   html;     #        index  index.html index.htm;     #    }     #}  } 

nginx命令：

Java代码

1. start nginx 开启nginx
2. 
   
3. Nginx -s stop 快速关闭Nginx，可能不保存相关信息，并迅速终止web服务。（quick exit）
4. Nginx -s quit 平稳关闭Nginx，保存相关信息，有安排的结束web服务。（graceful exit）
5. Nginx -s reload 因改变了Nginx相关配置，需要重新加载配置而重载。（changing configuration，start a new worker,quitting an old worker gracefully.)
6. Nginx -s reopen 重新打开日志文件。(reopenging log files)

start nginx   开启nginx    Nginx -s stop         快速关闭Nginx，可能不保存相关信息，并迅速终止web服务。（quick exit）   Nginx -s quit         平稳关闭Nginx，保存相关信息，有安排的结束web服务。（graceful exit）   Nginx -s reload       因改变了Nginx相关配置，需要重新加载配置而重载。（changing configuration，start a new worker,quitting an old worker gracefully.)   Nginx -s reopen       重新打开日志文件。(reopenging log files)

上面两resin的服务器已经打开，更改两服务器下的如(resinserver1)：/usr/resin/resinserver1/resinserver1/webapps/ROOT　下的index.jsp

区别服务器访问路径：

Java代码

1. <%@page language="java" import="java.util.*" pageEncoding="UTF-8"%>
2. <%
3. %>
4. <html>
5. <head>
6. </head>
7. <body>
8. nginxserver1<!--在另一台服务器上写nginxserver2-->
9. <br />
10. <%out.print(request.getSession()) ;%>
11. <br />
12. <%out.println(request.getHeader("Cookie")); %>
13. </body>
14. </html>

<%@page language="java" import="java.util.*" pageEncoding="UTF-8"%>         <%         %>         <html>           <head>             </head>               <body>                nginxserver1<!--在另一台服务器上写nginxserver2-->                 <br />                <%out.print(request.getSession()) ;%>                 <br />                 <%out.println(request.getHeader("Cookie")); %>               </body>          </html>

　这时重启nginx

这时访问：http://127.0.0.1/index.jsp会出现以下情况：

Java代码

1. 比较
2. resinserver1----->
3. nginxserver1
4. SessionImpl[aaadbhbcljrab7wtdprmt,]
5. JSESSIONID=aaadbhbcljrab7wtdprmt
6. 
   
7. 或者
8. resinserver2----->
9. nginxserver2
10. SessionImpl[aaadbhbcljrab7wtdprmt,]
11. JSESSIONID=aaadbhbcljrab7wtdprmt